You are here： Home > News >
Several fixed way center couplings
Several fixed way center couplings
Several fixed way center couplings
Source: Foshan Electrical Equipment Co. center
1. Locate the screws: two screws gap 90o to the fixed shaft locking, traditional fixed manner, since the front end of the screw axis exposure may cause damage or disassembly difficult axis.
2. clamping screws: hexagon bolt tightening internal use of force, the slit contraction, while the axis of tightly clamped. This fixed and removal easy, and will not cause damage to the axis, it is a very common way of fixing.
3. keyway Fixed: suitable for high torque transmission, in order to prevent axial sliding, usually associated with the positioning screw and clamping screw and use.
4.D word hole fixing: Under normal circumstances, if the motor shaft is a D-shaped, screw down if the situation can not be fixed, can be processed into a corresponding hole coupling the motor shaft size D-shaped hole, with positioning screws, do not worry about slipping up.
5. The expansion sleeve is fixed: four screws oppression set of books the way inflation by tightening the coupling end face tight fixed, applies to some large torque stepper motors and servo motors fixed link, such as a diaphragm coupling expansion sets , expansion sets plum coupling expansion sets bellows couplings.
Foshan Electrical and Mechanical Equipment Co., Ltd.
